Bottle Cap Display Case and Crown Cap DISPLAY CASE Company

from www.UsaDisplay.Net

Display - Organize - Protect

---

Although this style is shown with casino chips these make a Wonderful Bottle Cap Display Case.
Questions? Call (402) 359-5539

Wall mount or Table Top display cases
Model B202 with fiber filled insert: ( 8" x 14 1/2" x 1" ) - Only $19.25

These display cases are constructed of a hard black vinyl covered hard board frame with a glass top window lid with white fiber filling.
Model B202-G with Gray Colored Foam Cover: ( shown below ) Only $25.20

Your trestured items are held in place by the gentle pressure of the glass top and locked to the base by a four chrome locking pin system.

---

Model B206: ( 4" x 5" x 7/8" ) ( shown below ) Only $7.50

Model B206: ( 4" x 5" x 7/8" ) with gray foam cover ( Shown Below) Only $10.45

Model B206 ( 4" x 5" x 7/8" ) with Silver Gray Colored VELVET Cover:
( shown below ) Only $16.45

Your trestured items are held in place by the gentle pressure of the glass top and locked to the base by a four chrome locking pin system.

VELVET Covers are also available in a wide variety of colors (See List Below)
Questions? Call (402) 359-5539

---

Enhance your Table Top Display by adding our
Black Vinyl coated display case easel: Model 50-0118 ( 4" ) Only $6.97

---

Model B202-FVI* with flocked Velvet Insert: Only $27.00

Over demensions ( 8" x 14 1/2" x 1" ) 18 compartments ( 2 1/4" x 1 1/2" )
Larger and smaller Compartment sizes are also available... Click... HERE ( once there, scroll to the bottom of the page)
This special "fluted" inserts are made to hold a chip tight. This same insert can be order un-fluted with compartments ( 2 1/4" x 2" ). Colored divider inserts are available in several colors... Red, Blue, Gray, Burgundy, and Black
*When ordering please add the model nuber of the color your want
*Model D247-fluted (red),
*Model D248-fluted (blue),
*Model D249-fluted (gray),
*Model D250-fluted (black).
*Model D251-fluted (burgundy),
Enhance your Table Top Display by adding our
Black Vinyl coated display case easel: Model 50-0118 ( 4" ) Only $6.97
Back Vinyl coated display case easel: Model 50-0120 ( 6" ) Only $8.97
Both easels can be used for Horizontal or Vertical display.

Low Cost Collector Cabinets

Low Cost Collector Cabinets

Low Cost Collector Cabinets

Aluminum Traveling Show Case

To see Many other sizes of this same style display case Click... HERE

Prices do not include Packaging & Postage. Please copy model numbers and go to our
Questions? Call (402) 359-5539

---

Crown Cap - Bottle Cap Display - Protector Page
Although the picture below shows this item with casino chip it work great for Bottle Caps !

Model Pro-pg ONLY $3.95 each.
Compartment / pockets are 2" x 2". Overall dimensions of pages are 8 1/2" x 11".

Please note that although the picture shows our Pro-tector pages with casino chips they a great for COINS!
Uniquely Designed - Special Locking Force, Holds Caps Secure - Archival - No PVC, Acid Free - Super Strong - Highest Clarity.
Model Pro-pg ONLY $3.95 each.

Prices do not include Packaging & Postage.
Please copy model numbers and go to our on-line ORDER PAGE
Questions? Call (402) 359-553

Model 111

Only $14.95 each

Vintage Bottle Openers For SALE... Click HERE

---

Model 311...( for small bottle Openers )

Only $14.95 each

We alsdo offer these models...

Model 511 ( Regular size Openers ) 8 compartments: 5 /14"L x 1 5/8"W x 1"D...not shown above.
Model 721 ( Large size Openers ) 4 compartments: 7 /14"L x 2 3/8"W x 1"D...not shown above.

---

Collector's Display Case protects, displays and organizes your complete and precious collection. These display cases are made of a revolutionary clear, soft, lightweight plastic. They are extremely strong and virtually unbreakable. They allow perfect viewing from all sides, and with the lid snapped in will protect from dust, damage and theft. Each collectible is suspended in its own compartment for added protection. This means the side-wall of one compartment is not the side wall of the compartment next to it. There is an air pocket all the way around each compartment. Do to the unique design, even if the case is dropped and it lands on the side, top or bottom, none of the compartments will hit the surface. They can be wall mounted or if stacked they will lock together.Overall dimensions are: 9"L x 12 1/2"W x 1 3/8"D.

---

FOAM INSERTS for your DISPLAY CASE ...The Display Case Foam Inserts will provide your collectible with a soft, colorful, protective base. They are ideal for collectibles such as Pins, Lapidary, Buttons, Jewelry and any item you want to give a special look.One advantage to a dealer is that without the foam insert you can see both sides without having to get into the case and when stacked, you can see through the stack, 3 or 4 cases deep.The Display Case Foam Inserts are ONLY $3.95 for each set when ordering an accompanying display case. The foam inserts come in two colors -- Red and Gray.Please use model FI - ( model # of case ) --R, i.e. if you wanted a red set of foam inserts for the MDL-331 you would need to place your order as follows, FI-331-R and if you wanted a gray set of foam inserts for the MDL-721 you would need to place your order as follows, FI-721-G.There is one advantage to a dealer not using foam inserts... you can see both sides without having to get into the case and when stacked, you can see through the stack 3 or 4 cases deep.

---

The Display Case Easel was designed for those collectors who want to "shelf mount" rather then "wall mount" but because it will generate so much attention to your collectibles, dealers love it when displaying at shows. People don't have to bend over the top of a display to view items. Our two piece "break away" design allows the riser and base to separate for easy take down. The elevated display case gives your collection the look as if it were suspended in mid-air!
Best of all they're ONLY $3.95 each when ordering an accompanying display case.
Please use model MDL -DCE when ordering the Display Case Easel.

---

Bottle Cap Display Case for individual Bottle Caps
...Model SGL-1...$2.95 each or Only $16.95 for 10 cases!)
Prices do not include Packaging & Postage. Please copy model numbers and go to our on-line ORDER PAGE
Overall dimensions: 4 1/4" x 3 7/8". Compartment size: 1 3/4" dia. x 1" deep.
Questions? Call (402) 359-5539

---

Mini-Dome Bottle Cap Display Case

Model Mini-Dome (regular): Displays items up to 1 3/8" dia. - 1 1/2" H x 1 1/4" W. ONLY $4.95
Questions? Call (402) 359-5539

---

" SHELFcases ©"

To see more of our " SHELFcases ©"... Click Here

---

Our " SHOWCase© " Line...

Not only do these display case make a great table top display but many collectors mount them on the wall so that the door swings open from the left or the right... They make a marvelous SHOWCase©!
To see all these great " SHOWCase© " Display Cases... CLICK HERE
Questions? Call (402) 359-5539

---

The above pictures are just a few of the many of different display cases we offer.To find what you are looking for please click ...Here

Prices do not include Packaging & Postage. Please copy model numbers and go to

our on-line ORDER PAGE

Fancy Counter Top Display Cases For A Host of Collectibles... Click Here

Upscale Display Cases For your very best... Click Here

Unique inexpensive Display Cases for collectibles of all types... HOMEPAGE

Questions? ... Email: sales@UsaDisplay.Net

Collector's Display Case - 512 North Spruce St. Valley, NE 68064 - 9670.

Questions? Call (402) 359-5539

Copyright 1995 - 2009 Collector's Display Case Company. All Rights Reserved.