Custom Display Cases made of Plastic or Glass.

custom display cases

Let our 25 years of experience
create the perfect case for your needs.

Direct to the Consumer.


NOTE: This is a very large page so
Please scroll all the way to the bottom
!


We also create custom Wall Displays...

To learn more about Sizes and Pricing Click... HERE


Enhanced Wood Bases with Black Trimmed Edge are available

when ordering Plastic / Acrylic / Lucite Cases.



Questions? Call (402) 359-5539
Add a Silver or Gold, Presentation plaque / Name plate

Note: ( up to 4 line but note the more lines the smaller the size of letters...
usually less is better ) One to 2 lines is recommended.

( Size of plate: appox.1 3/4" x 1/2" )...Only $18.92
( Size of plate: up to 2 1/2" x 3/4" )
...Only $28.92
Name plates with Colored emblem / Logo Only $38.92

NOTE: When ordering a Custom Name Plate...
In the field / box marked Model Number,
Place the words " Custom Name Plate " SILVER " or " GOLD "
and in the
Description Field,
Type what you want your name plate to read as follows..
Line 1: ( Type what you want on line 1 )
Line 2: ( Type what you want on line 2 )
Line 3: ( Type what you want on line 3 )

We might have the size you are looking for in our Plexi Division...
To see HUNDREDS of Pre made cases please
click ...Here

Need a Custom Size? ...

Custom Display Case are created with a crystal clear 5 sided lift off top.
Optional Black Lucite
or Wood Base With Black Trim are available.

To calculate the cost simply use the following formula...

When determining the size you need... a good guide is to add 1" to 3" to all side
( Length, Width and Height ) of the item(s) you wish to display as to not crowd them too close to the edges / side of your display case.

NOTE:
"L" = length is the front... left to right.
"W" = width as deep front to back.
"H" = height as tall.

Add all three of your dimensions and multiple your total number of inches by $5.92 ( for cases up to 49 inches total ) and the total $ is your cost for a museum quality Crystal Clear 5 sided Top. Options are:

Example: 9" L + 9" W + 11" H
= 29 total inches... 29" x $5.92 = Only $171.68.

NOTE: Total inches up to 49 total inches... multiple your total number of inches by $5.92
NOTE: 50 total inches to 59 total inches... multiple your total number of inches by $6.92
NOTE: 60 total inches to 69 total inches... multiple your total number of inches by $7.92
NOTE: 70 total inches to 74 total inches... multiple your total number of inches by $8.92
NOTE: 75 total inches to 95 total inches... multiple your total number of inches by $9.92
NOTE: 96 or more total inches.................. multiple your total number of inches by $10.92

Above formula is for Case made of crystal clear Plastic / Lucite.

Mirrored Back Option: - Add 20%

Display Case Base Options are:
Black Lucite - Add 17%
or
Mirrored over Black or Clear Lucite Base - Add 25%


Hardwood Bases with Black Trim - Add 35%

Glass Top instead of Lucite Add 35%

NOTE when placing your Order: Custom Cases have NO model number so when ordering...
Place the words " Custom Display - Lucite " or " Custom Display - Glass "
Field / Box marked Model Number and then in the Description field type in the
dimension with
( Length, Width and Height ) in that sequence...
"L" = length is the front ( left to right )
"W" = width as deep ( front to back )
"H" = height as tall.( height )

After you place your order, you will receive an email conformation with any corrections that might be
necessary due to errors in you calculations.
A sign-off receipt will also be emailed to you before processing your order.

ORDER PAGE
Questions? Call (402) 359-5539
When calling in with questions it's important to know the dimensions
( length , width and height ) of your items. If you have more then one item
please let us know how many items.

NOTE: Large Custom Cases ( cases over 70 total inches ) my need Custom Crating...


Revolutionary Display modulars - You Assemble on location.

NOTE: This is a very large page so
Please scroll all the way to the bottom
!

Display Case Kit

Clear Base with Hinged Locking Door
( Shown Left )
Mirrored Wood Base
( Shown Right )

Black Lucite Wood Base

Custom Display Modular shown below is
Chrome connector clips are used to create your display Case modular.
Hinges and hasps connectors allow you to create locking doors.

Wood bases are available with Black Acrylic or Mirrored bottom for an additional charge.


Questions? Call (402) 359-5539

Floor Models
Floor Model Kits
To see MANY more styles
LIKE the ABOVE
click HERE

Open Front Floor Models
Open Front Floor Model Kits
To see Many more styles
LIKE the ABOVE click HERE
You are here
Custom Modular
You Assemble on Location.
Display Case Kit
To see Many more styles
LIKE the ABOVE click HERE

Display Kits can be Custom designed to accommodate your needs and can include a hinged locking door.


Need a Custom Size? ...

Custom Case are created with a crystal clear 5 sided lift off top and clear pedestal base.

To calculate the cost simply use the following formula...

When determining the size you need... a good guide is to add 1" to 3" to all side
( Length, Width and Height ) of the item(s) you wish to display as to not crowd them too close to the edges.

NOTE:
"L" = length is the front... left to right.
"W" = width as deep front to back.
"H" = height as tall.

Add all three of your dimensions and multiple your total number of inches by $5.92 ( for cases up to 49 inches total ) and the total $ is your cost for a museum quality Crystal Clear 5 sided Top. Display Base Options are:

Example: 9" L x 9" W x 11" H
= 29 total inches... 29" x $5.92 = Only $171.68.

NOTE: Total inches up to 49 total inches... multiple your total number of inches by $5.92
NOTE: 50 total inches to 59 total inches... multiple your total number of inches by $6.92
NOTE: 60 total inches to 69 total inches... multiple your total number of inches by $7.92
NOTE: 70 total inches to 74 total inches... multiple your total number of inches by $8.92
NOTE: 75 or more total inches.................. multiple your total number of inches by $9.92

Above formula is for Case made of crystal clear Plastic / Lucite.

Base Options are:
Bases are available in Black or Mirrored - Add 11%.

Glass Top instead of Lucite Add 35%

Hardwood Bases with Black Trim Add 35%

NOTE when placing your Order: Custom Cases have NO model number so when ordering...
Place the words " Custom Display - Lucite " or " Custom Display - Glass "
Field / Box marked Model Number and then in the Description field type in the
dimension with
( Length, Width and Height ) in that sequence...
"L" = length is the front ( left to right )
"W" = width as deep ( front to back )
"H" = height as tall.( height )

on-line ORDER PAGE



Questions? Call (402) 359-5539
When calling in with questions it's important to know the dimensions
( length , width and height ) of your items. If you have more then one item
please let us know how many items.

Collector's Display - 512 North Spruce St. Valley, NE 68064 - 9670.